The classification of a production area determines the treatment required before Live Bivalve Molluscs (shellfish) may be marketed for human consumption.
Shellfish production and relay areas are classified according to the levels of E. coli detected in shellfish flesh.
Permitted levels of E. coli
Levels of E. coli are measured per 100g flesh.
In all cases, the health standards are set out in:
- Annex III of European Community Regulation 853/2004
- Annex II of European Community Regulation 854/2004
The end product microbiological criteria specified in the European Regulation 2073/2005 must also be met.
The production area will be classified as A, B or C, with A as the least and C as the most contaminated. The level of treatment required to remove contamination from the LBMs after harvesting depends on this classification. If contamination levels are consistently so high that a class C cannot be achieved then harvesting from the area may be prohibited.
The standards that must be achieved and the level of treatment required for each classification are:
- minimum of 10 samples required per year
- 80% of sample results must be less than or equal to 230 E. coli/100g
- no results may exceed 700 E. coli/100g
Shellfish can be harvested for direct human consumption if the end product standard requirements are met.
- minimum of 8 samples required per year
- 90% of sample results must be less than or equal to 4600 E. coli/100g
- No sample result may exceed 46000 E. coli/100g
Shellfish can be supplied for human consumption after one of three processes. The options are:
- purification in an approved establishment
- relaying for at least one month in a classified Class A relaying area
- an EC approved heat treatment process
- minimum of 8 samples required per year
- All sample results must be less than or equal to 46000 E. coli/100g
Shellfish can only be sold for human consumption after completing one of three possible processes.
These processes are:
- relaying for at least two months in an approved class B relaying area followed by treatment in an approved purification centre
- relaying for at least two months in an approved class A relaying area
- after an EC approved heat treatment process
Shellfish from areas with consistently prohibited level results (greater than 46000 E. coli/100g) must not be subject to production or be harvested.
Shellfish can be purified (depurated) by holding them in purpose built tanks of clean or artificial seawater. The shellfish are placed in water for the time necessary to reduce contamination to make them fit for human consumption. The water conditions encourage the shellfish to filter out contaminants such as E. coli.
Dispatch centres are any on-shore or off-shore area that processes shellfish fit for human consumption.
All purification and dispatch establishments must be approved by your Local Authority. You must meet the specific requirements for purification and dispatch centres in Annex III of Regulation (EC) 853/2004.
Potential classification and filling out the form
If you are interested in principle to harvest/fish or relay shellfish in England and Wales, you must first apply for classification of the production area. The production or relay area application form should be completed by the applicant (the harvester) and the Local Authority.
Please note that the classification of a shellfish harvesting area does not confer the right to harvest shellfish.
You may need permissions from other bodies before proceeding. It is the responsibility of the applicant to obtain these permissions, as required, and for the Local Authority to check everything is in place, including their ability to sample for ongoing monitoring, before the application is submitted to the FSA.
This form needs to be forwarded to us with a suitable map and any other relevant supporting information as specified in the form.
The preferred format is a copy of an:
- OS 1:25,000
- 1:50,000 map
- Admiralty chart with the position and extent of the shellfish beds clearly marked
After you’ve sent the form
Once we receive your application, it is verified by us and we will ask for further information or clarification if needed. Once we are satisfied, we will send it to our contractor to undertake a Representative Monitoring Point (RMP) assessment if it’s necessary.
An RMP assessment is an assessment of the pollution sources affecting the area, to find appropriate sampling points and determine a sampling plan for potential classification.
Ten samples at least a week apart are required for a provisional classification. After a full year of sampling, an annual classification may be approved.
In some cases, a preliminary classification can be given ahead of a provisional classification. Further information on the classification process is available in the classification protocols.
Dealing with high results
Local action plans are decided using local factors and conditions. The amount of detail in the plan will depend on:
- the number and size of shellfish beds under the responsibility of the Local Food Authority
- any special local conditions
- the number of stakeholders involved
Action states apply to all classes of shellfish beds. It will be in place after your results have been found to be above the permitted level.
A bed may be temporarily downgraded or closed as part of short term control measures during an Action State.
To re-open the bed at its previous classification, two consecutive satisfactory samples taken at least seven days apart.
Current classification lists
Classification monitoring results
- England and Wales
- Northern Ireland